Micronics PCI/ISA System Board D6-IN Manuale Utente Scaricare il pdf (Pagina 21)

3-7

Installing System Memory and Add-On Peripherals

Installing the CPU Power Module

To install the CPU Power Module, follow the instructions below:

1. Turn the computer off and remove the chassis cover.

2. Locate the CPU Power Module socket located below the ZIF socket.

3. Ground yourself and remove the CPU Power Module from its antistatic

bag.

4. Insert the module with the bottom edge level to the socket. Gently press

straight down until the module locks into place (Figure 3-2).

Figure 3-2 Installing the CPU Power Module

Removing the CPU Power Module

Perform for the following steps to remove the power module.

1. With both thumbs (or a finger from each hand), press the release tabs

away from the socket until the module rises slightly from the socket.

2. With the SIMM free from the release tabs, lift the module up and place in

an anti-static bag or package.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 50 51

Nessun commento

Micronics PCI/ISA System Board D6-IN Manuale Utente Pagina 21